Gauge Valve

The gauge valve comes in many configurations, ranging from single isolate valves with a bleed port, to block and bleed valves with varying end configurations. Our gauge valves, Block and Bleed type, as standard, are rated to 413bar (6,000 PSI), but can be rated at 689 Bar (10,000 PSI) and are available in a range of different materials.

Materials

Gauge Valve is Constructed from 316 stainless steel, carbon steel or alloy 400, each single piece manifold is compact and features locking plates, mounting holes and upstream or downstream ports. Thoroughly tested to withstand up to 1200° F, instrument manifolds perform in many of the most demanding environments

We offer a variety of different Gauge valves with Multiport, Vent & Manifold which includes the following

  1. Two Valve Manifolds
  2. Gauge Bleed Needle Valves
  3. Gauge Vent Valves
  4. Gauge Multiport Valves

 

Application

FAV Gauge Valve are designed for stringent application in Oil & Gas, Chemical, Petrochemical etc. industries. These gauge valve can be used for throttling and straight isolation in process or flow control applications. These metal seated valves are machined from square bar stock and are available in sizes 1/8” to 2” in various connections. 10000 psi valves are rated upto 1” pipe size.

Construction

Rising stem& bar stock body design. Metal-to-Metal seating achieves buddle-tight shut-off, longer stem/seal life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance. Gauge Valve or Block and Bleed Valvesavailable in 316 Stainless Steel, Monel, Duplex & other exotic material. Gauge valve in BSPP, BSPT, ISO, Socket & Butt Weld etc. connections available on request.Temperature range 100°C to 230°C (400°C Optional ). Gauge Valve Manifolds are designed for Pressure upto 20,000 PSI. Spindle is thread rolled and burnished for smooth operation and long life. All gauge valve are 100% factory tested with dust and thread caps are provided as standard for Needle valve

Features

1)     Compact design

2)     Available in variety of material

3)     Low operating Torques

4)     Dust Cap provided

5)     Variety of end connections includes Male / Female NPT, BSPT, BSPP

6)     Every valve is factory tested

7)     High Pressure Rating Available till 15000 psi

Translate »