Block And Bleed Valve

The purpose of the block and bleed manifold is to isolate or block the flow of fluid in the system, so the fluid from upstream of the manifold does not reach other components of the system that are downstream, then bleed off or vent the remaining fluid from the system on the downstream side of the manifold. For example, a block and bleed manifold would be used to stop the flow of fluids to some component, then vent the fluid from that component’s side of the manifold, in order to effect some kind of work (maintenance/repair/replacement) on that component. 2 way manifold valves ,A block and bleed manifold with one block valve and one bleed valve is also known as an isolation valve  or block and bleed valve; a block and bleed manifold with multiple valves is also known as an isolation manifold.

Block And Bleed ValveManifold Valve 2 Way ,Block and Bleed.

 

 

 

 

 

 

We have Block and Bleed Valve available in NPT Male X NPT Male connections also . Below is the sample photo. This can also be supplied with NPT Female X NPT Female connections

Block and Bleed Valve Male X Male

1)  Available in ¾” and ¼”

Standard is ½”

Application

FAV Block And Bleed Valve are designed for stringent application in Oil & Gas, Chemical, Petrochemical etc. industries. These gauge valve can be used for throttling and straight isolation in process or flow control applications. These metal seated valves are machined from square bar stock and are available in sizes 1/8” to 2” in various connections. 10000 psi valves are rated upto 1” pipe size.

Construction

Rising stem& bar stock body design. Metal-to-Metal seating achieves buddle-tight shut-off, longer stem/seal life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance.Multiport Gauge Valve or Block and Bleed Valves, available in 316 Stainless Steel, Monel, Duplex & other exotic material.Gauge valve in BSPP, BSPT, ISO, Socket & Butt Weld etc. connections available on request.Temperature range 100°C to 230°C (400°C  Optional ) .Block And Bleed Valve Manifolds are designed for Pressure upto 20,000 psi .Spindle is thread rolled and burnished for smooth operation and long life.All gauge valve are 100% factory tested with dust and thread caps are provided as standard for Needle valve

Features

1)     Compact design

2)     Available in variety of material

3)     Low operating Torques

4)     Dust Cap provided

5)     Variety of end connections includes Male / Female NPT, BSPT, BSPP

6)     Every valve is factory tested

7)     High Pressure Rating Available till 15000 psi

Translate »