PTFE Coated Nut and Bolt Red Color
PTFE Coated Nut and Bolt reduces the friction during use and reuse, it has brilliant anti- corrosive properties and increases the usage life of Fasteners.PTFE Coated Nut and Bolt’s provides exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal.Extensive testing and field use have proven that the future of coated fastener’s lies with Fluoropolymer coatings. Previously hot dip, galvanized, cadium or zinc plated fastener’s were considered the standard. But these coatings could not stand up to the corrosive atmospheres prevalent in many industries. The most widely used application is on B7 studss with 2H nuts.Dramatic improvements in efficiency, life expectancy and corrosion resistance are claimed to be imparted to Nut and Bolt connectors by the application of a low friction PTFE coating. PTFE Coated Nut and Bolt have out-performed all others in aggressive any noticeable effect. All the material used for Manufacturing is tested for chemical & mechanical properties. The Results are confirmed to meet original material requirement before processing.
PTFE Coated Nut and Bolt have a well established reputation of doing brilliantly in the corrosive atmospheres prevalent in offshore oil and gas, offshore rigs & platforms, shipping, chemical, pharmaceutical, deep sea drilling, shipping, and marine, and power, and nuclear, electronic petrochemical, fluid.
Why use PTFE Coated Nut and Bolt
TFE is non-stick, non-toxic self-lubricating and non-wetting,. It has brilliant anti-corrosive properties, superior heat resistant and has cryogenic constancy. All these properties of PTFE Coated Nut and Bolt create a long term advantage for a PTFE Coated Nut and Bolt user. The use of PTFE Coated Nut and Bolt (polytetrafluoroethylene) nonstick coatings is a two part system.
Two coats are applied to the bolts, first a primer and next as a topcoat. Both PTFE coatings are essential to the long-lasting life of the fasteners. PTFE Coated Nut and Bolt possesses the highest operating temperature of any fluoropolymer. Added benefits are a low coefficient of friction and good chemical resistance.
PTFE Coated Nut and Bolt Technical Datasheet
|Technical Specifications: Use Temperatures||Working temp. range up to + 260°C|
|Corrosion Resistance||Salt Spray (ASTM B117) up to 3,000 hrs (Nuts not frozen)|
|Pencil Hardness||5H – 6H (ASTM D3363-92A)|
|Kinetic Friction Coefficient||0.06 – 0.08|
|Thickness||Nominal 0.001” (1 mil)|
|Impact||160 in lb (ASTM D2794-93)|
|Adhesion||5B (ASTM D3359-95)|
|Tensile Strength||4,000 psi|
|Operating Pressure||Up to 100,000 psi|
We make variety of PTFE Coated Nut and Bolt – B7 Studss & 2H Nuts.We also deal in PTFE Coatings on metal items, High Tensile Fasteners, Corrosion Resistance Coating, Fluoropolymer Lined Products, High Tensile Alloy Fasteners, High Tensile Fasteners, PTFE Coated Nut and Bolt, Ptfe Coated Nuts, PTFE Coated Nut and Bolt.