2 Way Manifolds Valves, R2, Type-4

Manufacturer and Exporter of 2 Way Manifolds Valves, R2, Type-4, 1/2″ NPT Female 6000 PSI, PTFE Seats. Ready Stock available and Competitive pricing. The purpose of the block and bleed manifold is to isolate or block the flow of fluid in the system, so the fluid from upstream of the manifold does not reach other components of the system that are downstream, then bleed off or vent the remaining fluid from the system on the downstream side of the manifold. For example, a block and bleed manifold would be used to stop the flow of fluids to some component, then vent the fluid from that component’s side of the manifold, in order to effect some kind of work (maintenance/repair/replacement) on that component. 2 Way Manifolds Valves, R2, Type-4, A block and bleed manifold with one block valve and one bleed valve is also known as an isolation valve  or block and bleed valve; a block and bleed manifold with multiple valves is also known as an isolation manifold.

1) Available in ¾” and ¼”

Standard is ½”

2) Standard Threading is NPT

Also Available in BSP

Two Way Manifolds Valves, R2, Type-Four

2 way manifolds

 

 

 

 

 

 

 

 

2 way manifolds

 

 

 

 

 

 

2 way manifolds

 

 

 

 

Translate »